We Will Match Any Advertised Airtronics Dealer Price
-
The SD-10G includes the Transmitter, Receiver, Transmitter Battery, Charger, Switch Harness, Servo Extension, and Manual.
Available aftermarket items include servos, lithium transmitter battery, stick extensions, trainer cord, memory expansion card, USB cable, program.
If you're looking for a radio that does it all and yet is affordable for all, look no further. The SD-10G is the one to get.
SD-10G - 2.4Ghz FHSS 7Ch Radio Set (TX/RX - No Servos)
Universal Features:
• 10-Channel Computer Radio With Advanced Programming for Competition Helicopters, Sailplanes, And Powered Aircraft.
• Compatible With All Airtronics 2.4GHz FHSS Aircraft Receivers
• System Includes 6-cell 1500mAh NiMH TX Battery And Charger
• Transmitter Is Compatible With 2-Cell Lithium Batteries
• Full-Range 92104 10-Ch 2.4GHz Receiver Included
• Ball Race Supported Gimbals With Adjustable Springs And Adjustable Throttle Ratchet
• Unique “Direct Model Select” Allows Selection of 3 Favorite Models Without Entering the Computer
• Stick Mode 1, 2, 3, and 4 Are Available And Easily Selected By User (Default Is Mode 2)
• Telescoping Transmitter Antenna for Increased Range When Needed. Retractable for Storage And Park-Flyer And Indoor Use
• 5 Complete Flight Modes (Helicopter, Sailplane, and Aircraft)
• Flight Modes Can Be Named
• 3-axis Triple Rates And Triple Expo With Unique Adjustment in Each Direction of Travel
• All Switches Are 3-Position Switches
• Proportional Side Sliders With Center Detent
• 100% Completely Assignable Switches
• 20-Model Memory, with Optional Sanwa Card to Provide Memory for 20 Additional Models
• Model Setups Can Be Shared On-line and Firmware Updates Available On-line With Use of Airtronics USB Cable and Program (available separately)
• 5 P-Mixes with 9-Point Curves and Graphs
• Customizable Menu
• Simple Wing, Swash, And Model Templates For Easy Model Setup
• Easy Navigation, Spreadsheet-Like Menu For Control Surface/Swash Adjustments
• Complete Trim Authority And Sensitivity Adjustments and Cross-Trims
• Easily Activated and Inhibited Inc/Dec Switch Allows The Pilot to Adjust Mixing Ratios In-Flight
• Failsafe Programming Available On All Channels
•
• Multi-Function Timer
• Advanced Trainer Functions (Trainer Only Available on SD-10G to SD-10G)
Features Specific to Different Model Types:
Helicopters:
• Advanced Swashplate Control With Both Channel and Servo EPA, Delay, Linear Adjustments
• 3 Gyro Gains in Each Flight Mode for Helicopters
• 3 Governor Settings In Each Flight Mode For Helicopters
• 9-Point Pitch And Throttle Curves With Graphs
Sailplanes:
• Proper Landing Over-ride Flight Mode For Sailplanes
• 6 Servo Wing Capable For Sailplanes
• Proper Camber To Elevator and Elevator To Camber Mix With Multi-Point Curves With Graph
• Landing Mode Assigned To Ratcheted Stick Overrides other Modes When Activated.
Aircraft:
• 9-Point Throttle Curve With Graph
• Advanced Mixing for Roll, Pitch, Yaw Coupling And Engine Thrust Compensation.
• Present Functions for Twin-Engine Aircraft
• Throttle Cut Button
• Dual Idle (Idle Down) Function
• Easy Setup For Differential Ailerons
• Easy Setup For Dual Elevator or V-Tail
Owners Manuals:
SD-10G Operating Manual - Aero
SD-10G Operating Manual - General
SD-10G Operating Manual - Glider
SD-10G Operating Manual - Heli
SD-10G Operating Manual - Help and Reference
SD-10G Operating Manual - Surface -
The SD-10G includes the Transmitter, Receiver, Transmitter Battery, Charger, Switch Harness, Servo Extension, and Manual.
Available aftermarket items include servos, lithium transmitter battery, stick extensions, trainer cord, memory expansion card, USB cable, program.
If you're looking for a radio that does it all and yet is affordable for all, look no further. The SD-10G is the one to get.
SD-10G - 2.4Ghz FHSS 10Ch Radio Set (TX/RX - No SX)
Universal Features:
• 10-Channel Computer Radio With Advanced Programming for Competition Helicopters, Sailplanes, And Powered Aircraft.
• Compatible With All Airtronics 2.4GHz FHSS Aircraft Receivers
• System Includes 6-cell 1500mAh NiMH TX Battery And Charger
• Transmitter Is Compatible With 2-Cell Lithium Batteries
• Full-Range 92104 10-Ch 2.4GHz Receiver Included
• Ball Race Supported Gimbals With Adjustable Springs And Adjustable Throttle Ratchet
• Unique “Direct Model Select” Allows Selection of 3 Favorite Models Without Entering the Computer
• Stick Mode 1, 2, 3, and 4 Are Available And Easily Selected By User (Default Is Mode 2)
• Telescoping Transmitter Antenna for Increased Range When Needed. Retractable for Storage And Park-Flyer And Indoor Use
• 5 Complete Flight Modes (Helicopter, Sailplane, and Aircraft)
• Flight Modes Can Be Named
• 3-axis Triple Rates And Triple Expo With Unique Adjustment in Each Direction of Travel
• All Switches Are 3-Position Switches
• Proportional Side Sliders With Center Detent
• 100% Completely Assignable Switches
• 20-Model Memory, with Optional Sanwa Card to Provide Memory for 20 Additional Models
• Model Setups Can Be Shared On-line and Firmware Updates Available On-line With Use of Airtronics USB Cable and Program (available separately)
• 5 P-Mixes with 9-Point Curves and Graphs
• Customizable Menu
• Simple Wing, Swash, And Model Templates For Easy Model Setup
• Easy Navigation, Spreadsheet-Like Menu For Control Surface/Swash Adjustments
• Complete Trim Authority And Sensitivity Adjustments and Cross-Trims
• Easily Activated and Inhibited Inc/Dec Switch Allows The Pilot to Adjust Mixing Ratios In-Flight
• Failsafe Programming Available On All Channels
•
• Multi-Function Timer
• Advanced Trainer Functions (Trainer Only Available on SD-10G to SD-10G)
Features Specific to Different Model Types:
Helicopters:
• Advanced Swashplate Control With Both Channel and Servo EPA, Delay, Linear Adjustments
• 3 Gyro Gains in Each Flight Mode for Helicopters
• 3 Governor Settings In Each Flight Mode For Helicopters
• 9-Point Pitch And Throttle Curves With Graphs
Sailplanes:
• Proper Landing Over-ride Flight Mode For Sailplanes
• 6 Servo Wing Capable For Sailplanes
• Proper Camber To Elevator and Elevator To Camber Mix With Multi-Point Curves With Graph
• Landing Mode Assigned To Ratcheted Stick Overrides other Modes When Activated.
Aircraft:
• 9-Point Throttle Curve With Graph
• Advanced Mixing for Roll, Pitch, Yaw Coupling And Engine Thrust Compensation.
• Present Functions for Twin-Engine Aircraft
• Throttle Cut Button
• Dual Idle (Idle Down) Function
• Easy Setup For Differential Ailerons
• Easy Setup For Dual Elevator or V-Tail
Owners Manuals:
SD-10G Operating Manual - Aero
SD-10G Operating Manual - General
SD-10G Operating Manual - Glider
SD-10G Operating Manual - Heli
SD-10G Operating Manual - Help and Reference
SD-10G Operating Manual - Surface
SD-10G 10ch 2.4G Tx w/10ch Rx Detail -
Fly the SD-6G and you'll have a radio ready for just about every 6-channel aircraft and helicopter available today. From micro electric aircraft to scale aerobatic aircraft, from mini fixed-pitched heli's to advanced CCPM 3D electric helicopters, the SD-6G can handle it, and it'll do it glitch-free. The rock-solid Airtronics FHSS-1 spread-spectrum 2.4G equipment will give you protection from interference, and full-range performance you demand. And, with FHSS-1 from Airtronics, you know you're flying a fast radio, too. Latency on the SD-6G rivals that of radios that cost 2-3 times as much. You'll never have to worry about out-of-sync servos or mix-delays again. Loaded with features using Airtronics locked-in 2.4GHz technology, and a value price, the SD-6G is the most versatile, affordable, performance-oriented 6-channel available today. Transmitter uses 6 AA batteries (included). Key Features:
• 10-Model Memory
• Advanced Airplane and Heli Software
• 3 Flight Modes (Heli and Air)
• P-Mixes
• 3-Axis Dual Rate and Expo
• 5-Point Throttle Curve (Heli and Air)
• Gyro Switch (Heli)
• Advanced Swashplate CCPM Mix (2 and 3 sx)
• Advanced Swashplate Leveling (Heli)
• Servo Monitor
• Throttle/Engine Cut Switch
• Trainer Compatible with SD-5G and SD-10G
• Adjustable Gimbal Spring Tension
• Advanced Aircraft Mixes
• Direct Select – Model Select Buttons
Program Features (Common for Both Heli and Air):
• Model Naming
• Model Select
• Model "Direct Select"
• Data Reset
• Data Copy
• Trainer System (Compatible with SD-5G/10G)
• Throttle Cut
• Wing/Swash Type
• Dual Rates (3 axis) (Common or Individual for Flight Modes)
• Exponential (3 axis) (Common or Individual for Flight Modes)
• 3 Flight Modes
• Individual or Common Trims
• Program Mixes (2)
• Servo Reverse
• Sub Trim
• EPA
• Servo Monitor
• Stop Watch
Airplane Functions:
• Wing Type
• 5-Point Throttle Curve
• Aileron Differential
• Flaperon Mix
• Flap-Elevator Mix
• Dual Elevator Mix
• Ailvator
• V-Tail
• Delta
• Program Mixes (2) (Note: Curves, D/R, EPA, All Mixes can be individual for Flight Modes)
Helicopter Functions
• CCPM/Swash Type (2 and 3 servo swash plates)
• 5-Point Throttle Curve
• 5-Point Pitch Curve
• Revo-Mix
• Gyro Control
• EPA for Individual Swash Servo (swash leveling)
• 3-Axis EPA post-mix
• Swash Mix Control
• Throttle Trim Inhibit for Aerobatic Flight Mode
• Program Mixes (2) (Note: Curves, Gyro, D/R, EPA, All Mixes can be individual for Flight Modes)
RX-600
We've paired the SD-6G with the spectacular small-size full-range RX600 6-channel receiver. This receiver is compatible with all Sanwa 2.4GHz aircraft radios. It uses only two little antennas on extensions, so you can place them in the best spot for full-range performance. And at a weight of under 12 grams with case, it'll fit in just about every application. But, if it doesn't, Airtronics offers a wide selection of receivers from 5 gram 6-channel park flyer receivers to affordable 5-channel full-range receivers, Airtronics has the right receiver for your application.
Specifications:
• 6-channel operation with RX600 receiver
• FHSS-1 Frequency-Hopping Spread-Spectrum
• 2.4GHz band
• Programming Features: Aircraft AND Helicopter
• 10-Model Memory
• Mode 2
• TX Battery: 6 AA 1200mAh Ni-MH
Includes:
• SD-6G Transmitter
• RX600 Full-Range Receiver
• 6 AA's (1200mAh Ni-MH Rechargable)
• Overnight Dual-Output Charger
• Detailed Instruction Manual
• 1-Year Warranty
SD-6G 2.4G 6-Ch Computer Radio w/RX600 Details -
Airtronics RDS8000 8-Channel 2.4GHz FHSS-1 Aircraft Radio
The RDS8000 is a full-featured 8-Channel 2.4HGz FHSS-1 Digital Proportional radio control system, packed with capabilities for all types of aircraft and helictopers. A top-quality digital radio, the RDS8000 is noted for its ease-of-operation and programming. Fixed wing, sailplane and helicopter pilots will all benefit when using the programming features the RDS8000 offers.
Whether flying a basic model or one that requires advanced features, the RDS8000 can do it all! One of the key features of the RDS8000 is the ability to use both basic or advanced program menu. The RDS8000 makes programming easier by allowing you to turn off any programming screen not required, and because it uses Airtronics' 2.4GHz FHSS-1 frequency modulation, you never have to worry about an 'open frequency'. Fly without frequency control any time with confidence.
*The RDS8000 features a Trainer System that is compatible with Airtronics RD, RDS and VG series transmitters.
General System Features:
• 8-Channel 2.4GHz FHSS-1 Digital Proportional Computer Radio Control System for Aircraft and Helicopters
• Includes 92824 8-Channel 2.4GHz FHSS-1 Receiver
• Model Type Selection
• 10 Model Memory
• Model Naming (3 Characters)
• Data Reset and Data Copy
• Stop Watch
• Digital Trims
• Servo Reversing
• End Point Adjustment
• Servo Sub-Trim
• 2 Compensation Mixers
• LCD with Voltage Indicator and Low Voltage Alarm
• Integral System Timer
• Click Audio Tones
• Dual Rate Alarm
• Adjustable Stick Tension and Length
• Switch Reversing
• 8 Cell Ni-Cd Transmitter Battery
• Trainer System
Aircraft-Specific Programming Features:
• Exponential
• Dual Rate (Elevator and Aileron)
• Digital Trim Memory
• Trim Authority (STEP) for Digital Trim
• Flaperon and Spoileron Mixing
• Elevon (Delta) Mixing
• V-Tail Mixing
• Throttle Cut
• Dual Elevator Mixing
• Aileron Mixing
• Landing Differential
• Crow Mixing
• Flap to Elevator Mixing, Throttle to Elevator Mixing and Rudder to Aileron Mixing
• Aileron to Rudder Mixing, Rudder to Elevator Mixing and Elevator to Flap Mixing
Helicopter-Specific Programming Features:
• Exponential
• Dual Rate (Elevator, Aileron and Rudder)
• Four Flight Modes
• 5-Point Throttle Curve (All Flight Modes)
• 5-Point Pitch Curve (All Flight Modes)
• 3-Point Revo Mixing (All Flight Modes)
• Remote Gyro Control
• Throttle Cut
• Swash Plate Type Selection
Transmitter Specifications:
• Output Power: 90mW
• Current Drain: 180mA
• Temperature Range: 0ºF ~ 160ºF
• Pulse Width: 1.5msec
• Weight with Batteries: 27.0oz (765gr)
• Frequency/Modulation Type: 2.4GHz/FHSS-1
92824 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-1
• Nominal Input Voltage: 4.8v ~ 6.6v
• Weight: 0.33oz (9.0gr) with Case
• Dimensions: 1.85 x 1.08 x 0.60in (47 x 27.5 x 15.2mm)
• Fail Safe Support: Yes (CH 1 ~ CH 4)
• Connector Type: Universal 'Z'
What's In The Box:
• RDS8000 8-Channel 2.4GHz FHSS-1 Transmitter
• 92824 8-Channel 2.4GHz FHSS-1 Receiver
• 8 Cell Transmitter Battery Pack
• AC Dual Output Overnight Charger
• On/Off Switch
• User's Guide
Items Required, But Not Included:
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 Battery Pack. DO NOT USE A 2S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. -
Airtronics SD-5G - A Game Changer
Entry-Level never worked so well.
Airtronics has re-invented the 2.4GHz sport aircraft radio with the SD-5G. It has all the ease-of-use of a non-computer radio, yet is a computer radio with easy to use added features that make it a step beyond entry-level radios. Additionally, no company has been able to do what Airtronics has done: Give the modeler a reliable, full-line compatible, 2.4GHz Computer radio that rivals the prices of 72Mhz equipment.
Check out these features:
• 3 Model Memory
• Digital Trims With Audible Sound for Neutral Setting
• 2.4GHz Airtronics FHSS-1 Proven Technology
• Compatible with ALL Airtronics FHSS-1 Receivers
• Servo Reversing
• Delta/Elevon Mixing
• V-Tail Mixing
• Master Dual Rate Switch
• Throttle Cut
• Trainer Compatible with other SD-5G AND SD-10G radios
• ATV (Adjustable Throw Volume) for flight control channels
• EPA (End Point Adjustment) for throttle
• Light-Weight, Well Balanced
• High Quality And Feel Gimbals
• Full Range Radio 2.4GHz system
• Includes RX600 2.4GHz FHSS-1 Full Range Receiver
The SD-5G does not include batteries and only requires 6 for the transmitter. It is fully operational with common Alkaline AA batteries. Conversion to rechargeables is easy and affordable with Hi-Energy 1200mAh Ni-MH Cells and the Airtronics New Dual Charger for 4-6 cell Transmitters.
SD-5G 2.4GHz 5ch Computer Radio - Air Details -
Airtronics MX-Sport
3-Channel 2.4GHz FHSS-2 Surface Radio
The Airtronics MX-Sport 3-Channel 2.4GHz FHSS-2 Pistol Grilp Computer Radio is the ultimate 2.4GHz sport car and boat radio! It has amazing features usually only found on radios for twice the price. This makes the MX-Sport possibly the best-value 3-channel 2.4GHz computer radio in the hobby today. There is no comparison!
System Features:
• 3-Channel Full-Range 2.4GHz FHSS-2 Digital Proportional Computer Radio for Cars, Trucks and Boats
• Includes Airtronics 92524 3-Channel 2.4GHz FHSS-2 Surface Receiver
• Compatible with Other Airtronics 2.4GHz FHSS-2 Surface Receivers
• Accepts Optional Rechargeable Ni-Cd or Ni-MH Batteries
• 10 Model Memory with Model Select
• Servo Reversing (All Channels)
• Dual Rate (Steering and Throttle)
• End Point Adjustment (Steering and Throttle)
• Exponential (Steering and Throttle High)
• Ergonomic, Comfortable Feel
• Over 1000 Foot Range
• Battery-Less Memory Retention
• Anti-Lock (ABS) Braking
• Throttle Fail Safe
• Digital Trims
• Charging Jack for Optional Ni-Cd or Ni-MH Batteries
• Easy-to-Read Multi-Function LCD
• Low Voltage Alarm
• Battery Voltage Monitor
• Model Naming
Transmitter Specifications:
• Output Power: 100mW
• Operating Voltage: 8.0v ~ 12.0v
• Power Supply: 8 Cell Alkaline/Ni-Cd/Ni-MH
• Weight: 14.28oz (405g) with Alkalines
• Frequency/Modulation Type: 2.4GHz/FHSS-2
92524 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-2
• Nominal Input Voltage: 4.8v ~ 6.6v
• Weight: 0.33oz (9.5g)
• Dimensions: 1.03 x 1.18 x 0.62in (26.1 x 29.9 x 15.7mm)
• Fail Safe: Yes (Throttle)
• Connector Type: Universal 'Z'
What's In The Box:
• MX-Sport 3-Channel 2.4GHz FHSS-2 Transmitter
• 92524 3-Channel 2.4GHz FHSS-2 Receiver
• On/Off Switch
• Receiver Battery Holder
• User's Guide
Items Required, But Not Included:
Transmitter Batteries: The transmitter requires 8 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable using Ni-Cd or Ni-MH cells and the Airtronics 95033Z 110V AC Dual Charger.
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 Battery Pack. DO NOT USE A 2S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. -
Airtronics MX-3X Transmitter
3-Channel 2.4GHz FHSS-3 Surface Radio System
Since the beginning, the MX series has lead the way with a feature-packed radio at an affordable price. Today's MX-3X is the pinnacle of this development. This is a 3-channel radio with advanced programming that some radio manufacturers do not offer at any price!
The MX-3X is not only feature-packed, it is also FAST. Truly FAST. The MX-3X uses the same high-speed, high-performance FHSS-3 technology previously only available in the top-of-the-line M11X! This makes it one of the absolute fastest radios at ANY PRICE! However, just because we used FHSS-3 technology in this radio does not mean you are locked into using only high-end receivers! All of the fast and affordable FHSS-2 receivers from Airtronics are compatible with the MX-3X. So, when you're running a sport truck or "for fun" vehicle, aftermarket receivers are available at some of the most affordable prices in the industry today. And, because we're using FHSS-2 and FHSS-3 technology, the radio has very long range and is compatible with boats and cars - even 1:4 scale!
With all these features in one of the fastest 2.4 systems on the market, the MX-3X is perfect for any level of the hobby. For first-time users or professional racers, there are features that can be suited to the driving style and need of any one on land or water!
System Features:
• 3-Channel 2.4GHz Computer Radio with Advanced Programming
• Includes 92744 4-Channel 2.4GHz FHSS-3 Surface Receiver
• Designed for Competition Cars, Trucks and Boats at an Affordable Price
• Compatible with All Current Airtronics 2.4GHz FHSS-3 and FHSS-2 Surface Receivers
• High-Power FHSS-3 Technology Provides the Best Reception and Connectivity,
• 4 Cell Dry Cell Battery for Lighter Weight
• Accepts Optional 6 Cell Rechargeable Ni-MH Battery, 2S Li-Po or 2S A123/Li-Fe
• 18 Model Memory
• Servo Reversing
• Steering Dual Rate
• End Point Adjustment
• Exponential
• Adjustable Servo Speed
• Four Wheel Steering Mixing
• Dual Throttle Mixing w/Dig & Burn
• Brake Mixing with Brake Hold
• Auxiliary Channel 3 ON-OFF
• Step Auxiliary
• Point Auxiliary
• Auxiliary Mixing (ST>CH3, TH>CH3)
• Programmable Fail Safe
• Receiver Battery Voltage Fail Safe
• Digital Trims
• Programmable Trim Switch
• Adjustable Throttle Trigger
• Model Naming
• Model Select
• Model Clear
• Servo Sub-Trim
• Mode Type (FH2/FH3/FH3F/DS2)
• Audible Key Tone
• Low Voltage and Inactivity Alarms
• Battery Type Selectable (4 Cell or 6 Cell)
• Battery Voltage Monitor
Transmitter Specifications:
• Output Power: 100mW
• Nominal Input Voltage: 4.8v ~ 7.2v
• Power Supply: 4 Cell or 6 Cell
• Weight: 1.19lbs (with Alkalines)
• Weight: 1.27lbs (with 6 Cell Ni-MH)
• Frequency/Modulation Type: 2.4GHz/FHSS-3
492744 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-3
• Nominal Input Voltage: 4.8v ~ 7.4v
• Weight: 0.3oz (8.5gr)
• Dimensions: 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm)
• Fail Safe Limit: 3.8v Default / 3.5v ~ 5.0v Adjustable
• Connector Type: Universal 'Z'
What's In The Box:
• MX-3X 3-Channel 2.4GHz FHSS-3 Transmitter
• 92744 4-Channel 2.4GHz FHSS-3 Receiver
• On/Off Switch
• Receiver Battery Holder
• User's Guide
Items Required, But Not Included:
Transmitter Batteries: The transmitter requires 4 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable with the Airtronics 95054z 6-Cell Ni-MH battery pack and the Airtronics 95034 110V AC Dual Charger. Alternatively, the transmitter can be powered using a 2S Li-Po or 2S A123/Li-fe battery pack. DO NOT USE A 3S Li-Po!
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 7.4v, therefore, the receiver can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model. -
Airtronics RDS8000 8-Channel 2.4GHz FHSS-1 Crawler Surface Radio
The RDS8000 8-Channel 2.4GHz FHSS-1 Crawler Version radio control system has been designed to allow maximum flexibility for four wheel steering (4WS as well as dig/independent motor control for crawlers with individual front and rear motors. The transmitter comes setup in Mode 1 and both control sticks are spring-loaded. This, coupled with the transmitter's extensive programmable mixes, allows you to customize the transmitter for just about any crawling setup you prefer.
*The RDS8000 Crawler Version retains all of the great features and programming ability of the RDS8000 aircraft version. The only difference is the Crawler version is set up for Mode 1 operation and both control sticks are self-centering. For information about programming the various mixes to control a common Rock Crawler setup, download the Crawler Version Supplement PDF above.
General System Features:
• 8-Channel 2.4GHz FHSS-1 Digital Proportional Computer Radio Control System
• Includes 92824 8-Channel 2.4GHz FHSS-1 Receiver
• Left and Right Control Sticks Spring Loaded (No Ratchets)
• Model Type Selection
• 10 Model Memory
• Model Naming (3 Characters)
• Data Reset and Data Copy
• Stop Watch
• Digital Trims
• Servo Reversing
• End Point Adjustment
• Servo Sub-Trim
• 2 Compensation Mixers
• LCD with Voltage Indicator and Low Voltage Alarm
• Integral System Timer
• Click Audio Tones
• Dual Rate Alarm
• Adjustable Stick Tension and Length
• Switch Reversing
• 8 Cell Ni-Cd Transmitter Battery
• Trainer System
Aircraft-Specific Programming Features:
• Exponential
• Dual Rate (Elevator and Aileron)
• Digital Trim Memory
• Trim Authority (STEP) for Digital Trim
• Flaperon and Spoileron Mixing
• Elevon (Delta) Mixing
• V-Tail Mixing
• Throttle Cut
• Dual Elevator Mixing
• Aileron Mixing
• Landing Differential
• Crow Mixing
• Flap to Elevator Mixing, Throttle to Elevator Mixing and Rudder to Aileron Mixing
• Aileron to Rudder Mixing, Rudder to Elevator Mixing and Elevator to Flap Mixing
Helicopter-Specific Programming Features:
• Exponential
• Dual Rate (Elevator, Aileron and Rudder)
• Four Flight Modes
• 5-Point Throttle Curve (All Flight Modes)
• 5-Point Pitch Curve (All Flight Modes)
• 3-Point Revo Mixing (All Flight Modes)
• Remote Gyro Control
• Throttle Cut
• Swash Plate Type Selection
Transmitter Specifications:
• Output Power: 90mW
• Current Drain: 180mA
• Temperature Range: 0ºF ~ 160ºF
• Pulse Width: 1.5msec
• Weight with Batteries: 27.0oz (765gr)
• Frequency/Modulation Type: 2.4GHz/FHSS-1
92824 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-1
• Nominal Input Voltage: 4.8v ~ 6.6v
• Weight: 0.33oz (9.0gr) with Case
• Dimensions: 1.85 x 1.08 x 0.60in (47 x 27.5 x 15.2mm)
• Fail Safe Support: Yes (CH 1 ~ CH 4)
• Connector Type: Universal 'Z'
What's In The Box:
• RDS8000 8-Channel 2.4GHz FHSS-1 Transmitter
• 92824 8-Channel 2.4GHz FHSS-1 Receiver
• 8 Cell Ni-Cd Transmitter Battery Pack
• AC Dual Output Overnight Charger
• On/Off Switch
• User's Guide
Items Required, But Not Included:
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 6.6v therefore, the receiver can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 battery pack. DO NOT USE A 2S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. -
Airtronics MT-4 Telemetry Radio
4-Channel 2.4GHz FHSS-4T Surface Radio
The Airtronics MT-4 4-Channel 2.4GHz FHSS-4 radio control system is the first 2.4GHz pistol grip radio to provide telemetry, industry leading latency, SSR (narrow pulse-width, super fast servo response) compatibility and 4 channels with advanced programming, all in one ultra-lightweight, comfortable case.
The feature set of the MT-4 is like no other radio in our hobby today. When used with the included Airtronics RX461 (92010) FHSS-4 receiver, real-time telemetry tells you what you need to know when you need to know it. In addition, the MT-4 supports Airtronics' FHSS-2 and FHSS-3 modulation types, so it will work with any Airtronics 2.4GHz FHSS-2 and FHSS-3 surface receiver as well (just no telemetry of course). This means you'll have your choice of affordable aftermarket receivers and high performance ultra-fast racing receivers to use with the radio. And, all of this is packed into a new ultra-lightweight comfortable case that features an integrated antenna, adjustable grips, adjustable steering and an adjustable trigger.
Whether you're racing at a world-class level, rock crawling over the most complicated courses, or just bashing in the backyard, the MT-4 will do what you need when you need.
System Features:
• 4-Channel 2.4GHz FHSS-4T Digital High-Response Computer Radio with Advanced Programming
• Includes RX461 (92010) 2.4GHz FHSS-4T Telemery Receiver
• Telemetry System Displays Temperature, RPM/Speed and Voltage in Real-Time
• High-Power FHSS-4T Technology Provides the Best Reception and Connectivity
• 4-Cell Battery Holder for Lighter Weight
• Accepts Optional Ni-Cd or Ni-MH Batteries or 2S Li-Po or 2S Li-Fe/A123 Battery Packs
• 18 Model Memory
• Telemetry Logging
• Channel Set Menu
• Servo Reversing
• Steering, Throttle and Brake Dual Rate
• End Point Adjustment
• Exponential and ARC Adjustment
• Servo Speed Adjustment
• Anti-Lock Braking
• Throttle Offset
• Lap and Interval Timers
• Total, Best and Individual Lap Display
• Four Wheel Steering Mixing
• Dual Throttle Mixing w/Dig & Burn
• Normal, SSR and SHR Servo Modes
• Center or Parallel Trim Types
• Step Auxiliary
• Point Auxiliary
• Auxiliary Mixing
• Programmable Fail Safe
• Receiver Battery Voltage Fail Safe
• Digital Trims
• Servo Sub-Trim
• Adjustable Throttle Trigger
• Programmable Switches, Lever and Dial
• Adjustable Steering Wheel
• Adjustable Grip
• Variable Rate Adjustment
• Model Naming
• Model Select
• Model Select Shortcut (Direct Model)
• Model Clear
• Selectable Modulation Type
• Multi-Function LCD Contrast
• Adjustable Key Volume and Tone
• Programmable Low Voltage Alarm
• Inactivity and Over Voltage Alarms
• Digital Battery Voltage Monitor
Transmitter Specifications:
• Output Power: 100mW
• Nominal Input Voltage: 4.8v ~ 7.4v
• Operating Voltage Range: 4.0v ~ 9.6v
• Dry Weight: 13.68oz (388gr)
• Frequency/Modulation Type: 2.4GHz/FHSS-4T/FHSS-3/FHSS-2 (Selectable)
RX461 (92010) Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-4T
• Nominal Input Voltage: 4.8v ~ 7.4v
• Weight: 0.34oz (9.6gr)
• Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)
• Fail Safe Limit: 3.5v ~ 7.4v (FH4T) / 3.5v ~ 5.0v (FH2/FH3)
• Connector Type: Universal 'Z'
What's In The Box:
• MT-4 4-Channel 2.4GHz FHSS-4T Transmitter
• RX461 (92010) 4-Channel 2.4GHz FHSS-4T Receiver
• On/Off Switch
• Receiver Battery Holder
• Optional Grip
• Wrist Strap Anchor
• RPM/Speed and Temperature Telemetry Sensors
• User's Guide
Items Required, But Not Included:
Transmitter Batteries: The transmitter requires 4 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable using Ni-Cd or Ni-MH cells and the Airtronics 95034 110V AC Dual Charger. Alternatively, the transmitter can be powered using a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po!
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 7.4v, therefore, the receiver can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model. -
Airtronics M11 4-Channel 2.4GHz FHSS-2 Surface Radio
The Airtronics M11 4-Channel 2.4GHz FHSS-2 Pistol Grip Radio is based on the award winning, world champion M11 Competition Pistol Grip radio. It is a high-output, full-range 2.4GHz digital system with all the features of the original M11, plus 30 model memory.
Using Airtronics' FHSS-2 Frequency Hopping Spread Spectrum modulation, you can enjoy crystal-free and interference-free performance. In addition, the M11 is compatible will all Airtronics 2.4GHz FHSS-2 surface receivers.
Among its many other titles and achievements, the M11 was the 2009 1:8th Scale ROAR National Champion.
System Features:
• 4-Channel 2.4GHz Computer Radio with Advanced Programming
• Includes 92624 4-Channel 2.4GHz FHSS-2 Surface Receiver
• Designed for Competition Cars, Trucks and Boats
• Compatible with All Current Airtronics 2.4GHz FHSS-2 Surface Receivers
• Uses 8 'AA' Alkaline Cells
• Accepts Optional 8 Cell Rechargeable Ni-MH Battery or 3S Li-Po
• 30 Model Memory with Model Select, Model Naming, Model Copy and Model Clear
• 2- or 4-Channel Mode Selectable
• Auxiliary Channel 3 Dial
• Large Backlit LCD Display
• Left or Right Hand Grip
• Digital Trims
• Key-Lock Switch
• Display Switch
• Adjustable Steering Wheel Tension
• Three-Page Programming
• Timer Vibration
• Battery Monitor
• User Naming
• Servo Monitor
• Exponential with Tweak Setting
• Dual Rate Steering
• End Point Adjustment
• Adjustable Rate Control
• Servo Speed Adjustment
• Anti-Lock Braking
• Traction Control
• Servo Sub-Trim
• Lap, Interval and Countdown Timers
• Starting Position
• Throttle Hold
• 3-Channel and 4-Channel Brake Mixing with Throttle Brake Cut
• 2 Compensation Mixers
• Adjustable Audible Key Tones and Alarm Tones
• Programmable Trim Switches
92624 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-2
• Nominal Input Voltage: 4.8v ~ 6.6v
• Weight: 0.39oz (9.6gr)
• Dimensions: 1.18 x 1.04 x 0.78in (30.0 x 26.5 x 20.0mm)
• Connector Type: Universal 'Z'
What's In The Box:
• M11 4-Channel 2.4GHz FHSS-2 Transmitter with 93824 FHSS-2 Module
• 92624 4-Channel 2.4GHz FHSS-2 Receiver
• On/Off Switch
• Receiver Battery Holder
• User's Guide
Items Required, But Not Included:
Transmitter Batteries: The transmitter requires 8 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable using Ni-Cd or Ni-MH cells and the Airtronics 95033 AC Dual Charger. Alternatively, the transmitter can be powered using a 3S Li-Po battery pack.
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 battery pack. DO NOT USE A 2S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model.
*The M11's 4th channel is not an independent channel. It is used as a 4th-channel brake that can be mixed with the channel 2 and/or channel 3 brake. -
Airtronics M11X FHSS-3
4-Channel 2.4GHz FHSS-3 Surface Radio System
The Airtronics M11X 4-Channel 2.4GHz FHSS-3 is the top-of-the-line ROAR NATIONAL CHAMPION competition surface radio that serious racers demand and the sportsman desires. Based on the legacy M8 and M11 radios that have won multiple awards, the M11X continues with the tradition offering the best radio with the most current features all users can appreciate. The M11X is lighter than previous models, faster than any wheel radio we've tested, and has additional features and numerous adjustments beyond even that of the original M11. And yet, its new layout makes using those features easier than ever before. From a custom menu where you can put your favorite features on one screen to multiple failsafe settings to optimize this feature for nitro or electric, the new M11X is amazingly powerful and easy to use.
With extended race times and events, the weight of the transmitter is more important than ever. The newly-designed, more-efficient, dedicated 2.4GHz RF system, along with the smaller and lighter transmitter battery work together to make the M11X lighter and easy to handle. Adding to the comfort, the M11X has a more traditional balanced feel and improved ergonomics.
For professionals, nothing matters more than speed and reliability. The M11X is lightning fast, thanks to the 2.4GHz system integrated into the radio circuitry in addition to using the latest FHSS-3 2.4GHz technology. This feature alone makes the radio inputs feel instantaneous! Lastly, while the legacy M11 had numerous adjustments, the M11X takes it one step further. We worked closely with our world-championship drivers, both boat and car, and we listened to them. The M11X has the added features needed for an ever-changing and expanding hobby.
2009 Multi-Event ROAR National Champion:
>Ryan Maifield - 1:8th Truggy, 1:10th Modified Electric Truck
>Ryan Cavalieri - 1:10th 2WD Modifeid Buggy, 1:10th 4WD Modified Buggy
System Features:
• 4-Channel Computer Radio with Advanced Programming for Competition Cars, Trucks and Boats
• Includes Airtronics 92744 4-Channel 2.4GHz FHSS-3 Receiver
• Transmitter compatible with Current Airtronics 2.4GHz FHSS-2 Surface Receivers
• Includes 6 Cell 1500mAh Ni-MH Transmitter Battery and Charger
• Transmitter and Receiver are Compatible with 2S Lithium Battery Packs
• Ball Bearing-Supported Steering Wheel and Trigger With Adjustable Spring Tension
• High-Power FHSS-3 Technology Gives The Best Reception And Connectivity
• 2.4GHz FHSS-3 System is Integrated into the Transmitter, Eliminating the Need for Modules
• Transmitter Can be Adjusted for Left or Right Handed Drivers
• Large Backlit LCD Display
• Programmable Digital Trim Switches
• Key-Lock Switch
• Display Switch
• Adjustable Steering Wheel Tension
• Three-Page Programming
• Timer Vibration
• Battery Monitor
• User Naming
• White or Blue LCD Display Options
• Servo Monitor
• Two Compensation Mixers
• Brake Mixing
• Throttle Hold
• Starting Position
• Servo Reversing
• Lap, Interval and Countdown Timers
• Servo Sub-Trim
• 30 Model Memory
• Model Select, Model Naming, Model Copy and Model Clear
• Programmable Switches
• Audio Sound Levels
• Anti-Lock Braking
• Adjustable Servo Speed
• ARC Steering and Throttle
• Expo Steering and Throttle with Tweak Setting
• End Point Adjustment
• Dual Rate Steering
• Rubber Stands
• LCD Protection Cover
• Programmable Dial Knob
• Grip Switch
• Variable Rate Adjustment
• Traction Control
• Custom Menu
Transmitter Specifications:
• Output Power: 100mW
• Operating Voltage: 6.5v ~ 11.0v
• Power Supply: 7.2v Ni-MH (Included) or 2S Li-Po or 2S A123/Li-Fe (Not Included)
• Weight: 1.73lbs (with 6 Cell Ni-MH)
• Frequency/Modulation Type: 2.4GHz/FHSS-3
92744 Receiver Specifications:
• Frequency/Modulation Type: 2.4GHz/FHSS-3
• Nominal Input Voltage: 4.8v ~ 7.4v
• Weight: 0.3oz (8.5gr)
• Dimensions: 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm)
• Fail Safe Limit: 3.8v Default / 3.5v ~ 5.0v Adjustable
• Connector Type: Universal 'Z'
What's In The Box:
• M11X 4-Channel 2.4GHz FHSS-3 Transmitter
• 92744 4-Channel 2.4GHz FHSS-3 Receiver
• 6 Cell 1500mAh Ni-MH for Transmitter
• Charger
• On/Off Switch
• User's Guide
Items Required, But Not Included:
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 7.4v, therefore, the receiver can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model.
*The M11X's 4th channel is not an independent channel. It is used as a 4th-channel brake that can be mixed with the channel 2 and/or channel 3 brake.