Isthmus Models

Whoever said you can't take it with you? Hitec's X1 AC Plus battery charger goes everywhere you go. Capable of charging all battery types, the X1 Charger is the affordable and portable answer to keeping your batteries charged and ready for action. The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources. Designed to charge NiMH, NiCd, LiPo, LiFe, Li-Ion and Lead-based batteries, the X1 AC Plus is the perfect charging solution for your RC hobby. Drivers and pilots alike will appreciate its price and relish in its dependability.

Charging Specifications

Battery Type	Voltage Level	Max Charge Voltage	Max Fast Charge Rate	Min. Discharge Cutoff Level
NiCd	1.2V /Cell	1.5V / Cell	1 - 2C*	0.85V / Cell
NiMh	1.2V /Cell	1.5V / Cell	1 - 2C*	1.0V / Cell
Li-ion	3.6V / Cell	4.1V / Cell	1C	2.5V / Cell
LiPo	3.7V / Cell	4.2V / Cell	1C	3.0V / Cell
LiFe	3.3V / Cell	3.6V / Cell	4C	2.0V / Cell
Pb (Lead Acid)	2.0V / Cell	2.46V / Cell	0.4C	1.75V / Cell

Special Features

Optimized Operating Software

The X1 "auto" function sets the charge and discharge current for you automatically, preventing overcharging which can damage your battery. In the event of an error, the X1 instantly disconnects the circuit and sounds an alarm once. This feature can be set by the user and controlled through the two-way link for maximum safety and minimizes these type of problems.

Internal Independent Lithium Battery Balancer

The X1 features a built-in a cell voltage balancer so you don’t need to fuss with external balancers while charging.

Balancing Individual Cells Battery Discharging

The X1 also monitors and balances each cell in the pack individually while discharging. If the voltage of any single cell is abnormal, the X1 will display an error message and the process will end automatically.

Adaptable To Various Types Of Lithium Batteries

The X1 will charge and discharge a variety of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.

Fast and Storage Mode Of Lithium Batteries

The X1 features two styles of charging. "Fast" charge reduces the charge duration while "Store" controls the final voltage of your battery, to optimize your packs for long term storage and maximum lifespan.

Maximum Safety

Our delta-peak voltage detection program ends the charge cycle whenever a battery's voltage exceeds the set threshold.

Automatic Charging Current Limit

Charging current can set by the user when charging NiCd or NiMH batteries. The 'AUTO' charging mode, however, is recommended when charging NiMH batteries with low impedance and capacity.

Capacity and Temperature Limits

The charge process will terminate if either the charging capacity or battery temperature exceeds the limit set by the user. Temperature function requires an optional temperature probe, which is not included with the X1.

Processing Time Limit

Protect your battery by setting a maximum time limit for charging and discharging.

Input Power Monitoring

The X1's input voltage is monitored to protect the battery from becoming damaged. The process ends automatically if it drops below the limit.

Data Store/Load

A maximum of five setting profiles can be stored for your convenience. The X1 will store the data pertaining to a program's settings and you can call up data at anytime.

Cyclic Charging/Discharging

A battery can be cycled 1 to 5 times. This process is good for refreshing and balancing your battery.

Recharging your high amperage batteries has never been easier or more affordable than with our
all-new X2 Ultima two-channel charger. Featuring dual 200-watt power ports, this efficient charger
will charge two Lithium, NiCd, NiMH or Lead Acid packs at once. It is capable of delivering 10 amps
of charging current and can discharge your packs at up to 5 amps for efficient battery maintenance.


Perfect for all electric aircraft and surface hobbyists, the X2 Ultima will power your larger batteries
in a short period of time and at a price that can’t be beat. High charging power, low cost.
Get more! Get Hitec!

We raised the bar on the X4 and equipped it with a built-in AC power supply. Our new X4 AC Plus, has four-port computer controlled capability with a built-in 22 amp power supply which can be powered by standard 120 volt AC household current. Simple to use and utterly reliable, this compact charger with battery management and integral balancer features four identical and independent 50-watt power outputs, for a total output power of 200 watts. Each port of the X4 AC Plus can handle up to a 6S Lithium pack, 15 NiCd/NiMH cells or 6-12 volt lead acid batteries. Four individual balancing ports eliminate the need for a separate balancer when charging Lithium batteries. Its twin fan cooling system with an internal sensor for controlling fan speed provides the utmost in efficiency and safety. The X4 AC Plus can accept a variety of power inputs including the option of attaching it to a 12-volt car battery or a 11–15 volt (20 amp minimum) DC power supply.
The Hitec X4 AC Plus charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly. 
Stock# 44167: Hitec X4 AC Plus AC/DC Four-Channel Multi-Charger
Input Requirements: 100-120V AC or 12 - 15 Volts DC, 20 Amp Minimum
Download the Manual HERE
Charging Specifications

Battery Type	Number of Cells	Voltage Level	Max. Charge Voltage	Max. Fast Charge Rate	Min. Discharge Voltage
NiCd	1 - 15	1.2V / Cell	1.5V / Cell	1 - 2C*	0.85V / Cell
NiMh	1 - 15	1.2V / Cell	1.5V / Cell	1 - 2C*	1.0V / Cell
Li-Ion	1 – 6	3.6 / Cell	4.1V / Cell	1C	2.5V / Cell
LiPo	1 – 6	3.7V / Cell	4.2V / Cell	1C	3.0V / Cell
LiFe	1 – 6	3.3V / Cell	3.6V / Cell	4C	2.0V / Cell
Pb (Lead Acid)	1 - 10	2.0V / Cell	2.46V / Cell	0.4C	1.75V / Cell

  
SPECIAL FEATURES
Optimized Operating Software The software in X4 AC Plus automatically controls the current rate during the charging or discharging process. This feature can prevent the user from overcharging their batteries which could lead to damage or injury. If the charger detects a malfunction, the circuit automatically disconnects and an alarm will sound, The operating functions of the X4 AC Plus are controlled through a two-way communication link in order to maintain maximum safety with minimal errors. All of these functions and settings are easily configured by the user.
Internal Independent Lithium Battery Balancers Each channel of the X4 AC Plus employs an individual-cell voltage balancer eliminating the need for an external balancer for balance charging.
Balancing Individual Cells during Battery Discharging During the process of discharging, the X4 AC Plus can monitor and balance each cell of the lithium battery individually. If the voltage of any single cell is abnormal, an error message will display and the discharge process will automatically end.
Charges Most Popular Lithium Batteries The X4 AC Plus is compatible with the three most common Lithium chemistry batteries, Li-Ion, LiPo and LiFe
Multiple Lithium Battery Charge Modes The X4 AC Plus's programming allows for Fast Charge, Balance Charge or Storage Charge Modes for LiPo, Li-Ion, and LiFe batteries.

• Fast Charge Mode: Reduces charging time, but does not balance the cells, this mode only charges the battery to approximately 90% capacity.
• Balance Charge Mode: Monitors individual cell voltage, keeping the cells within an acceptable voltage range and charges the pack to peak capacity.
• Storage Charge Mode: Used for long-term battery storage. Adjusts the voltage level so the battery will not be damaged during long term storage.

Delta Peak Technology for Maximum Safety The automatic charge termination program utilizes Delta-Peak voltage detection. When the battery's voltage exceeds the threshold, the charge process is terminated automatically.
Automatic Charging Current Limit The maximum charge rate can be manually set when charging NiCd or NiMH batteries. The X4 AC Plus will auto-detect when the batteries are fully charged and shut off, even with low impedance NiMH packs.
Capacity and Processing Time Limit The charging capacity is calculated as the charging current multiplied by time. If the charging capacity exceeds the maximum limit set by the user, the process will terminate automatically. Additionally the user can set the maximum amount of charging time. If the charging time exceeds this limit, the process will terminate automatically.
Temperature Threshold The battery's internal chemical reaction causes the temperature of the battery to rise during the charging process. If the temperature exceeds the limit, the charging process will automatically terminate. * This function is available by connecting an optional temperature probe, which is not included in our package.
5 User Customizable Presets Per Channel The X4 AC Plus features 5 individually customizable presets so the user can store the charge and discharge parameters for any particular battery type. These presets can be recalled for the desired battery type without the need for any additional programming.
Cyclic Charging / Discharging Batteries can be set to automatically Charge/Discharge or Discharge/Charge up to a maximum of 5 cycles.
PC Based Analysis Using USB Communication* The Hitec X4 AC Plus offers a PC-based program which can analyze the characteristics of the battery via a USB port. It shows a graph of voltage, current and capacity curves. It also displays the individual voltage of each cell in the lithium battery pack. * A PC-LINK USB adaptor can be purchased separately.

Up to 14S, up to 20Amps - governed by a 550Watt maximum rating - that sums up the Hyperion EOS 1420i NET3

If you are into big electric crafts, be it fixed wing, boats or the rapidly growing 700e heli-class then the Hyperion EOS 1420i NET3 is definately for you.

A brand-new power supply technology is boosting the charging power to 550W when the input voltage is between 24V and 28V. Of course you can still operate the EOS 1420i NET3 on the typical 12V also but with less overall wattage.

Double punch
Splitting large lipo packs into more smaller packs have always been a Hyperion mantra. The Hyperion NET chargers have since 2008 been featuring a network-mode where two chargers could sync-charge two identical packs that were split during charging and assembled in series during flight. The EOS 1420i NET3 moves the bar upwards - you will dispose over 1100W in network mode with a capability of charging a 28S lipo split-pack. Big just got bigger.

How much is 550W?
It is an easy calculation - let's look at how far we will get with a 5000mAh 6S lipo pack: 6S @ 3.7V is 22.2V. Now divide 550W with 22.2V to find the Amps... = 24.77Amps. This actually exceeds the 20A limitation of EOS 1420i NET3 ensuring you the full 20Amps charging power. In other words you can charge a Hyperion G3 5000mAh 6S lipo pack at 4C - or around 15 minutes.

2 x 7S super precise 12bit balancers built in
The latest 12bit balancer circuits are built into the EOS 1420i NET3 and deeply integrated into the operation modes of the charger. These balancers are a vital safety measure that monitors the entire charging process from the time you connect the pack until your order is carried out.

The EOS 1420i NET3 is sporting all the features you have come to expect and rely on from Hyperion chargers; StoreMode, TCS-charging, lots of memory slots (actually an infinite number via the free software that allows you super-easy charger management), and all the information you could ever need.

Look at the price again
A 550W 14S charger at this price - and at this renowned quality - sounds like a calculation mistake. It is not - it is progression, innovation and dedication delivered to you by Hyperion!

Click Here to see datasheet.

NEW! Hyperion EOS 0606i 6S 6A max CHARGER AC/DC, with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion Balance Multi-Adapter included for 2S to 6S packs! Also includes output cord.

IMPORTANT TECH NOTES FROM HYPERION


Connection Order:

Always connect the MAIN pack leads (the two +/- thick wires) to the charger FIRST, then insert the BALANCE Connector into the charger balance adapter.


Disconnection Order:
Always disconnect the BALANCE connector from the charger FIRST and then disconnect the MAIN pack leads (the two +/- thick wires).

Special Features:
2 input power choices: Use AC 100V~240V or DC11V~15V
Powerful, yet compact and portable with wide support for battery types
Inegrated Hyperion LBA Balancer for Lipo & A123 based cells
Balance Multi Adapter for 2S to 6S Packs Included
Charge and Discharge Modes (and cycling for Nimh and Nicd)
Clear and easy to read LCD Screen with warnings common setup errors
Aluminum Case, Long Input Leads
Support Battery Types: 1-14cell NiCD & NiMH, 1-6 Lipo, Lion & Lead Acid
Charge Current: 0.1A~6A Max
Discharge Current: 0.1A~1.0A Max
Trickle Charge: 0 ~ 200Mah
Display: 2-Line 16 Character Backlit LCD


PLEASE CLICK HERE FOR DATA SHEET

Hyperion EOS 0720i SUPER DUO3 7S 16N CHARGER, DC Input, with Integrated balancers, TCS & STORE MODE- DUAL 20A/500W max Outputs with max 14S SYNC MODE.

CLICK HERE to see Datasheet.

NEW! Hyperion EOS 0606i 6S 6A max CHARGER , with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC Inputs - Hyperion Balance Multi-Adapter included for 2S to 6S packs! See Details!

IMPORTANT TECH NOTES FROM HYPERION

Connection Order:
Always connect the MAIN pack leads (the two +/- thick wires) to the charger FIRST, then insert the BALANCE Connector into the charger balance adapter.

Disconnection Order:
Always disconnect the BALANCE connector from the charger FIRST and then disconnect the MAIN pack leads (the two +/- thick wires).
CLICK HERE TO SEE DATASHEET for User's Manual and full details

Hyperion EOS 0720i NET3 7S 16N CHARGER AC/DC with USA Power Cord, Integrated balancer, TCS & STORE MODE, 20A Max with 90W (AC) or 150W (DC) charger power. Network to 300W and 14S max(2x7S balanced)

CLICK HERE TO SEE DATASHEET

Hyperion EOS 0730i NET3 7S 16N CHARGER, DC Input, with Integrated balancer, TCS & STORE MODE, 30A/550W Max output.
Network to 1100W and 14S max(2x7S balanced)

CLICK HERE to see DATASHEET for User's Manual and full details

New Hyperion EOS LBA10 Net - The Most Powerful, Versatile Balance-Safety Adapter for Lithium Packs - Max 6S, 10A rating - Network 2 units for 7S~12S balancing.
The Hyperion EOS Lithium Balance Adapter 10 (LBA10) is the newest, most feature-packed and reliable lithium balancer on the market today, and comes at a bargain price. Simply put, it is the most powerful, versatile, and safest way to charge your lithium packs today. A single LBA10 provides three ways to balance your lithium packs from 2S to 6S, at a maximum of up to 10-ampere rate!

Or, you can network two LBA 10 together with NET cable and adapter pack #HP-EOSLBA10-MSC. Set one LBA10 to Master and one to Slave mode. Series the LBA input leads together, and connect to a charger with appropriate S rating. Now you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done. Connect the packs in series and fly, with balanced packs from 7S to 12S in this way!

Or, say you have two 5S chargers, and want to charge two 5S packs to connect and fly as 10S. Use each LBA10 in Master mode, and connect each to a separate charger and battery. When charging is finished, Connect the two LBA10 together in Master-Slave configuration, and connect them to the just-charged lithium packs. The LBA10 will work together until every cell in the two packs are balanced together, then automatically shut down. Takes only a few minutes. Now series the packs together and fly in peace!

Each LBA 10 comes with balance harnesses for 2S and 3S packs. For 4S to 6S packs, get the appropriate optional harnesses from these part numbers:
HP-EOSLBA10-MC-H4S
HP-EOSLBA10-MC-H5S
HP-EOSLBA10-MC-H6S

You can also order the Hyperion Multi- Adapters
HP-LB10-HP-B
HP-LB10-XH-B
HP-LB10-TP-B
HP-LB10-EH-B

ATTN: The standard harnesses are work for the Hyperion, Etec and Polyquest packs.

For ALIGN packs, please use the XH type harness available in this category. Be aware that the standard LBA 10 harness will fit the ALIGN packs but is not the correct harness, only the XH type will work.

The LBA 10 also has a DataPort (use optional cable #HP-EOSLBA10-DPC) which will allow you to monitor the individual cell voltages while you balance, using the LCD screen of any HYPERION charger which has DataPort option. (DP Chargers available on about Oct1, 2006)

CLICK HERE for updated manual which includes connector diagrams.

Know your packs! EOS SENTRY battery checker for LiIon, LiPo, LiFePO4, NiCd, and NiMH. See Details.

The EOS SENTRY is a quick, convenient, easy-to-use device. It shows at a glance the remaining capacity in your battery pack, cell balance, and other information you need to get the best performance and reliability from your batteries, and avoid costly mistakes.
Full details and Manuals in many languages are available at the SENTRY DataSheet. Check it out!

RECEIVER BATTERY LOAD TESTER

Onboard Receiver Battery Volt Indicator

• 70A continuous, 100A max,
• 3.3 - 50 VDC
• Displays amp, volt, watt, & mAh,
• Dimensions: 4.0 x 2.2 x 0.9 in,
• Weight: 3.6oz.

• MPI Pocket Charger for Small Packs

• Perfect budget charger for small packs!
• Charge current range: 50-500mA,
• Charge voltage : 2-8 NiCd or NiMH cells,
• Input power : 11-15VDC, 1A minimum,
• Discharge current : 100 ma,
• Delta peak cutoff, automatic trickle charging,
• Automatic Delta Peak Charge termination and change to trickle charging,
• Over current and reverse polarity protection,
• Dimensions : 4.6 x 2.5 x 1.3 in, weight: 5.7oz.

The LN-5014 will safely charge and discharge all Lithium, NiCd, NiMH and Lead-Acid battery packs and cells. An easy to read, Illuminated digital LCD screen displays battery type, charge/ discharge, mAh, voltage and charging time, enhancing the charging experience. To insure proper use, the LCD screen will also display error messages for out-of range input voltage, incorrect connection or reversed polarity, poor battery condition and internal errors. This easy to use charger, with its 4 button control panel and logical menus, is compact and simple to transport to the flying field or track.

ProPeak have an enviable reputation for producing feature packed products that offer truly outstanding value! The brilliant Sigma II EQ charger is no exception.

The Sigma II EQ is a high-performance, micro-processor controlled, fast charger/discharger has a built-in Lithium balancer. It's perfect for charging Li-Ion, Li-Po, Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from either a 10 ~ 18.0v DC power source or a 110v AC power outlet.

With a maximum internal circuit power of 50 watts and a variable charge current of up to 6.0A, the Sigma II EQ is a versatile and easy-to-use unit. With charging and discharging cycles, 5 regime memories, a storage setting for Lithium packs and much more, the Sigma II EQ does just about everything a modeler could need. Supplied with built-in XH balance ports and TP adaptor board to suit Impulse Power, Flight Power, Thunder Power and many other batteries with optional EH and PQ boards also available. The Sigma II EQ can be further enhanced with an optional temperature sensor.

In addition, the Sigma II EQ is encased in a high-quality metal case with integral heat sinks for even better cooling!

Specifications:

• Input Voltage: 10.0 ~ 18.0v DC or 100 ~ 240v AC

• Circuit Power: 50 Watts Maximum

• Charge Current: 0.1 ~ 6.0 Amps

• Current Drain (for Balancing): 300mAh/Cell

• Charges 1 ~ 15 Ni-Cd or NiMH Cells

• Charges 1 ~ 6 Li-Po, Li-Fe or Li-Ion Cells

• Charges 2v ~ 20v Lead Acid Batteries

Features:

Optimized Operating Software: When charging or discharging NiCd/NiMH batteries, the Sigma II EQ has ‘AUTO’ functions that set the feed current automatically. Alternatively, these can be set manually. For Lithium batteries, the Sigma EQ II can help prevent the over-charging that can potentially lead to an explosion, purely through an error. Every program in the unit is controlled with specialised software to detect almost every error, providing maximum safety. These parameters can be set at the operators discretion if required.

Includes TP Balance Board: A special balance adaptor board for TP connectors is provided as standard with optional boards available for other balance plug connectors. The ports on the side of the charger suit XH style connectors and a balance board for this type is not required.

*Includes Sigma II EQ charger, User's Guide, AC Power Cord, DC Power Cord with Alligator Clips and Balance Board for Use with Impulse Power and Thunder Power Style Packs

Specifications:
1-6 cells Li-Poly / A123 / LiFe
1-14 cells NiCad / NiMH
6V, 12V or 24V SLA batteries
Up to 10.0A, 80 watts max.
Will charge, balance, discharge & cycles batteries.

Includes:
2S-6S multi adapter board for TP & JST XH taps
DC output cable with 4mm male connectors
DC input cable with clamps
AC input cable

User Manual
Quick Ref Guide

The all-new TP820CD is the first ever dual port and the most anticipated, most powerful and most advanced multi-chemistry charger, discharger, cycler and balancer system from Thunder Power RC yet! With up to 800 watts of total charging power, nearly 4-times that of the ever-popular TP1010C, the TP820CD is equipped with two ports that function completely independently to charge, discharge and cycle a wide variety of 1-8S LiPo, LiIon and LiFe (A123) batteries, as well as 1-24 cell NiCd and NiMH along with 6-30V Pb (lead-acid) batteries. The built-in 2-8S LiPo/LiIon/LiFe (A123) cell balancers, one for each port, and included balance connector adapter boards are readily compatible with all Thunder Power balance connectors and the JST-XH balance connectors found on many other batteries.

The dual port TP820CD offers the convenience and flexibility of two separate chargers in a single yet incredibly compact case as a result of its advanced power conversion technology and all-new Thunder Power RC exclusive design. Each port is capable of charging at rates up to 20 amps, even simultaneously depending on input power and charge settings, offering the ability to charge many of the latest-generation LiPo batteries at ultra-fast rates up to 6C and beyond. This means the TP820CD is well-equipped to quickly charge batteries up to 8S on each port, as well as ‘split’ batteries equipped with interconnect leads up to 16S by using both ports simultaneously.
Popular examples of the incredible charging capabilities of the TP820CD are the ability to charge two 5S 5000mAh batteries, one on each port simultaneously at rates up to 4C, or two 6S 5000mAh batteries at rates more than 3C, to have a complete 10S or 12S 5000mAh battery setup charged in as little as 15 minutes or less time! That’s even faster than single port chargers rated at higher current and wattage output, without the need for cumbersome parallel charging and an even more powerful power supply, and without giving up the added convenience and flexibility that independent dual port charge, discharge and cycling functionality offers. And because each port functions independently you can even mix and match charge, discharge or cycling duties of a LiPo motor power battery and a NiMH transmitter battery, a NiCd receiver battery and a lead-acid field box battery or just about any other combination you might have.


Additional features include built-in data logging and viewing on the large, class-leading and easy-to-read 48-character blue backlit LCD screen, internal resistance measurement and an advanced Storage Mode function to automatically charge or discharge LiPo/ LiIon/LiFe (A123) batteries as needed. Other great features also include dual computer-controlled cooling fans and temperature protection, an attractive and extremely durable aluminum case, plus the ability to install future firmware updates available for free download from www.ThunderPowerRC.com using a standard mini USB cable. Best of all these incredible features are all available at a value that’s hard to beat while being fully supported and backed by Thunder Power RC’s industry-leading 2-year warranty. © 2011 Thunder Power RC

Features:
· Powerful all-in-one dual port charger, discharger and cycler system with built-in LiPo/LiIon/LiFe (A123) cell balancers that offer maximum safety, performance and easy-to-see individual cell voltages
· The included balance connector adapter boards (2pcs) allow the built-in balancers to be used with 2-8S Thunder Power-compatible balance connectors as well as the JST-XH balance connectors found on many other brand batteries from Align, Dynamite®, E-flite®, ParkZone® and more.
· Convenient and flexible dual (two) port design charges, discharges and cycles 1-8S LiPo/LiIon/LiFe (A123), 1-24 cell NiCd/NiMH and 6-30V Pb (lead-acid) batteries on each port independently or simultaneously
· More than double the charging power, up to 800 watts total (400 watts per port), of other similar class chargers with selectable charge rates from 0.2 amps up to 20 amps for each port
· The perfect choice for safe and ultra-fast charging at rates of 3-6C and beyond for the latest-generation LiPo batteries
· Charge two 5S or 6S 5000mAh batteries at rates up to 4C for 10S or 12S battery setup charge times of as little as 15 minutes or less* – even faster than single port chargers that require cumbersome parallel charging and a more powerful power supply
· Advanced Storage Mode function for LiPo/LiIon/LiFe (A123) batteries will automatically charge or discharge as needed to achieve storage level voltage
· 24 user-programmable memories plus built-in data logging and viewing with internal resistance measurement, battery voltage, input voltage, temperature and more
· Fully-adjustable charge capacity limit, per cell end voltage and low voltage cutoff settings for all chemistries to maximize safety, charge and discharge performance
· Durable and compact aluminum case with dual computer-controlled cooling fans and a large, class-leading and easy-to-read 48-character blue backlit LCD screen
· Wide input voltage range from 10.5-28.0V for higher efficiency and power output when using 24.0-28.0V power supplies
· Adjustable output power distribution per port, input power current limiting and low voltage cutoff settings to maximize performance while also protecting the charger and input power supply
· Future firmware updates can be downloaded for free from www.ThunderPowerRC.com when new features, battery chemistry and other updates are made available and are easily uploaded to the charger using a standard mini USB cable
· Full industry-leading 2-year warranty and support from Thunder Power RC

*With 24.0-28.0V input and depending on state of charge before charging begins



Images and Captions Adaptable Balancing

The built-in LiPo/LiIon/LiFe (A123) cell balancers and included balance connector adapter boards are readily compatible with all 2-8S Thunder Power balance connectors and the JST-XH balance connectors found on many other batteries.
Capable Connections

Separate main power and balancer connectors allow for simultaneous charging and balancing at charge rates up to 20 amps on each port while the programming connector can be used with a standard mini USB cable to install firmware updates.

Maximized Protection

The dual ports function completely independently, and with adjustable output power distribution, input power current limiting and low voltage cutoff you can maximize performance of each while also protecting the charger and power supply.
Specifications:

Type: Dual Port Multi-Chemistry DC Charger/Discharger/Cycler with Integrated Balancers
Battery Cell Counts/Types (Per Port): 1-8S LiPo/LiIon/LiFe (A123), 1-24 cell NiCd/NiMH and 6-30V Pb (lead-acid)
Balancer (Per Port): Integrated for 2-8S LiPo/LiIon/LiFe (A123) with balance connector adapter board for Thunder Power and JST-XH connectors
Input Power: 10.5-28.0V DC (40 amps max)
Charge Power: 800 watts max (400 watts max per port) w/24.0-28.0V input (see manual for additional information regarding input and output power)
Charge Current (Per Port): 0.2 to 20 amps in 0.01 amp increments
Charge Voltage: 50% storage and adjustable end voltage for LiPo/LiIon/LiFe (A123), adjustable delta peak sensitivity and end voltage for NiCd/NiMH and end voltage for Pb (Lead Acid)
Discharge Power: 100 watts max (50 watts max per port)
Discharge Current (Per Port): 0.2 to 10 amps in 0.01 amp increments
Discharge Voltage: Adjustable low voltage cutoff for LiPo/LiIon/LiFe (A123), NiCd/NiMH and Pb (lead-acid)
Cycles: 1 to 15 times with data stored for all cycles
Memories: 24 user-programmable
Firmware: User-updatable using USB

New from Thunder Power RC!

The TP103CQ-ACDC combo is the ideal, pocket-sized charger and power supply setup to charge the 1S 3.7V LiPo batteries typically used to power ultra-micro and similar class airplanes, helicopters and other models. The TP103CQ quad (4) port charger can be easily and conveniently powered from a 100-240V outlet using the included TP1201P AC to 12V DC, 1-amp power supply while the included DC input power leads can be connected to a 12V Pb/lead acid/gel cell battery for charging on the go. The charger features four ports that operate independently and allow you to charge one or up to four batteries simultaneously at a rate of 0.3A per port. Other great features include advanced multi-color LED indicators for each port that signal red when in charge mode and green when charging is complete for the simplest possible operation. The TP103CQ is compatible with Thunder Power RC ultra-micro class batteries (sold separately) in addition to most other similar class batteries.

Specifications:

Type: 1-Cell/1S 3.7V Ultra Micro LiPo AC/DC Charger
Input Power: 100-240V AC (using the included TP1201P Power Supply) or 11-15V DC
Battery Cell Counts/Type: 1S LiPo (ultra-micro class)
Charge Current: 0.3 amps per port (5 watts max)
Charge Ports: Quad (4) independent


Features:

Pocket-sized quad (4) port charger for 1S 3.7V ultra-micro class batteries
Four independently operating ports for charging one or up to four batteries simultaneously
Fixed 0.3-amp charge rate per port for safe and fast charging of ultra-micro class batteries
Advanced Multi-Color LED indicators for each port along with a separate main power LED indicator
Compatible with the housings and connector typically found on ultra-micro class batteries from Thunder Power RC and other popular brands
Includes and ultra-compact 100-240V compatible AC power supply (TP1201P)
Included DC input power leads can be connected to a 12V Pb/lead acid/gel cell battery to charge on the go